Zipper Attaching Machine Supplier: Your Guide to Gapping & Bottom-Stop Equipment
When you search for a zipper attaching machine supplier, you are likely looking for reliable equipment to produce zippers efficiently. At Jeso, we build machines that handle the critical steps after the chain is made: gapping (removing teeth), attaching stops, and assembling sliders. This guide covers the main machines you need, how they work, and how to choose the right one for your production.
What Is a Zipper Attaching Machine?
A zipper attaching machine is not a single machine but a set of machines that perform specific operations on a zipper chain. These operations include gapping (removing elements to create a space for stops), attaching top stops, bottom stops, pin-and-box, and inserting sliders. Depending on your zipper type—nylon, resin, or metal—you need different machines.
Key Machines for Zipper Assembly
Below are the Jeso machines that handle the attaching process. Each model is designed for a specific material and function.
| Machine Model | Function | Zipper Type |
|---|---|---|
| PM-021 | Gapping (removing teeth) for plastic zippers | Plastic (resin) |
| PM-031, PM-032 | Gapping for nylon zippers | Nylon coil |
| PM-051 | Gapping for metal zippers | Metal chain |
| PM-351 | Attaching pin & box (bottom stop assembly) | Nylon, plastic, metal |
| PM-361 | Attaching top stop | Nylon, plastic, metal |
| PM-371 | Attaching bottom stop | Nylon, plastic, metal |
| PM-363 | Attaching U-shaped metal stop | Metal |
| PM-321, PM-322 | Slider inserting (assembling sliders onto chain) | All types |
How to Choose the Right Zipper Attaching Machine
Your choice depends on the zipper material and the production volume. Here are the key factors:
- Zipper material: Nylon coil, resin (plastic), or metal chain. Each requires a specific gapping machine (PM-031/032 for nylon, PM-021 for plastic, PM-051 for metal).
- Stop type: For open-end zippers, you need a pin-and-box machine (PM-351). For closed-end, use PM-371 for bottom stop and PM-361 for top stop. Metal zippers may require U-shaped stops (PM-363).
- Slider type: Automatic or semi-automatic slider inserting machines (PM-321/322) speed up assembly.
- Production scale: If you produce high volumes, consider a full line with multiple machines running in parallel.
Why Choose Jeso as Your Zipper Attaching Machine Supplier?
Jeso is a factory-direct manufacturer. We build all machines in-house, so you get consistent quality and direct support. Our machines are used by zipper factories worldwide. We also provide molds for injection and die-casting, such as PMM-001~004 for injection (teeth and plastic stops) and PMM-006/007/008 for die-casting (sliders, pulls, and bottom plates). This means you can produce stops and sliders in-house, reducing dependency on external suppliers.
Frequently Asked Questions
What is the difference between a zipper gapping machine and a stop attaching machine?
A gapping machine removes zipper teeth to create a gap for stops. A stop attaching machine then fixes the stops (top, bottom, pin-and-box) onto that gap. They work together in sequence.
Can Jeso machines handle both nylon and plastic zippers?
Yes, but you need the correct model. For nylon, use PM-031 or PM-032 gapping machines. For plastic (resin), use PM-021. Stop attaching machines like PM-351 and PM-361 work with multiple materials.
Do you provide training for these machines?
Yes, we offer on-site training and technical support. Our team can help you set up and optimize your production line.
Get in Touch with Jeso
If you need a reliable zipper attaching machine supplier, contact Jeso today. We supply factory-direct machines for gapping, stop attaching, and slider inserting. Tell us your zipper type and production needs, and we will recommend the right equipment. Request a quote now.