PM-351 Auto pin and box fixing machine

Nylon Open-End Zipper MC

"Auto pin and box fixing machine
ltem:PM-351
Power:0.80KW
Production:1800pcs/Hwith 60cmzipper
Volt:220V
Machine weight:150Kgs
Machine size:1.35*0.75*1.75m
Packing size:0.80*0.80*1.50m"
Machine features
This machine adopts new process, press pin and box on the tape, then use pins to punch by secondary pressure, avoid pin and box to deformation, punching pin is produced by high quality and durable material

+86 18058303087[email protected]

Product Description

Product usage video：

Send Inquiry

If you have any enquiny about quotation or cooperation,please feel free to emal us at [email protected] or use the folowing enuiry form.
Our sales representative will contact you within 24 hours. Thank you for your interest in our products

* Title:

* Name:

* Email:

* Tel:

* Content:

Similar product

PM-032 Simple nylon zipper gapping machine(double teeth selection)

"Simple nylon zipper gapping machine(double teeth selection) ltem:PM-032 Power:1.0KW Production:3600pcs/ Hwith 60cm zipper Volt:220V Machine weight:234Kgs Machine size:1.30*0.55*2.00m Packing size:0.80*0.60*1.50m "

PM-091-N Normal close end cutting machine with robot arm

Commonality: 1. Different materials can not be commonly used by one machine. 2. Different sizes can not be commonly used by one machine. 3. Same slider body with different fancy pullers can be commonly used by one machine by changing slider mounting mould.

PM-031 Auto nylon zipper gapping machine(double teeth selection)

Auto nylon zipper gapping machine (double teeth selection) ltem:PM-031 Power:1.0KW Production:3600pcs/H w ith 60cm zipper Volt:380V Machine weight:245Kgs Machine size:2.00*0.55*2.00m Packing size:1.40*0.60*1.60m" Advantages 1-Using the gapping mould of 2 sides, 4 needle hooks, so that there is almost no need to clean the half teeth on two sides of zippers because only 0.2% of zippers will have half teeth. 2- By adopting touch screen control, customers can adjust the machine.

PM-018 Auto open end moulding machine

"Auto open end molding injection machine ltem:PM-018 Power:4.00KW Production:1000pcs/H with 60cm zipper Screw dia.:25mm Max injection:80g Volt:380V Machine weight:950Kgs Machine size:2.00*0.70*2.20m Packing size:1.35*0.70*2.15m" Advantages: This machine is with extra brightness LCD display screen, fast speed, accurate control, PID auto learning temperature control system, with good stability.